PYTHA Workshop - Remove Edge banding

Workshop allows you to assign your edge banding in PYTHA. Edges with edge banding applied will be displayed as a thick red line.

           

 

If you wish to remove an edge:

• Click Workshop > Processing > Edge banding
  
• Select the edges that you want to remove edge banding from
  
• Select the no edge banding option and click OK
  

           

• Edge banding will be removed from selected edges
  

• Related Articles

• PYTHA Workshop - Edge Banding Disappearing When Running Export to CAM

  Occasionally when processing a job from PYTHA using Export to CAM some Edge Banding may randomly disappear. This is caused by the corruption of certain parts within the model - specifically parts that have had holes put in them using Boolean > ...

• PYTHA Workshop - Removing Ghost Points

  Occasionally moving parts that have Type Automatic bore holes can create additional points, such as those shown in the image below. These points lose their connection to the original bore holes and can't be deleted using the usual Workshop > Bore ...

• PYTHA Workshop - Creating Rebates With Router Edges

  In PYTHA Workshop, the Router Edges function allows for the creation and export of custom routing. This could be machining for a recessed handle, a groove for an LED light strip housing, or any other face routing that cannot be generated through Type ...

• PYTHA Workshop - Remove Router Edges

  Workshop allows you to assign router paths to edges in PYTHA. Edges with Router edges applied will be displayed as a thick yellow line.               If you wish to remove Router edges from an edge: Click Workshop > Processing > Router edges         ...

• PYTHA Workshop - Banding Automatic and Group Orientation

  PYTHA Workshop's Banding Automatic function uses group orientation to automatically assign your edge banding. if Banding Automatic is edging parts incorrectly, as in the image below, check the Front Face orientation of all groups and sub-groups.     ...