PYTHA Workshop - Edge Banding Disappearing When Running Export to CAM

PYTHA Workshop - Edge Banding Disappearing When Running Export to CAM

Occasionally when processing a job from PYTHA using Export to CAM some Edge Banding may randomly disappear. This is caused by the corruption of certain parts within the model - specifically parts that have had holes put in them using Boolean > Difference. The effected Edge Banding may be assigned to parts other than those with Booleaned holes.

To rectify the issue:
  1. UPDATE your PYTHA software (CLICK HERE for more information)
  2. REDRAW any parts with booleaned holes (it is ok to Boolean > Difference the holes again)
  3. REAPPLY any missing Edge Banding as required
  4. RE-EXPORT the job using Export to CAM

If you are still experiencing issues after following these steps, please contact our Tech Team for assistance. 

    • Related Articles

    • PYTHA Workshop - Selecting your CAM export

      With the introduction of Workshop, some export functions in PYTHA have been relocated. All machining exports are now done through the Workshop menu, including Analyzer. To select your CAM export: Open the Workshop menu Click CNC Output > User layer ...

    • PYTHA Workshop - Shaped Parts Missing When Importing For Nesting

      When producing complex parts, such as CURVES and other non-rectangular items, PYTHA may require additional information in order to generate an export correctly. If you find some parts are missing from your nesting import, try applying a GRAIN ...

    • PYTHA Workshop - Creating Rebates With Router Edges

      In PYTHA Workshop, the Router Edges function allows for the creation and export of custom routing. This could be machining for a recessed handle, a groove for an LED light strip housing, or any other face routing that cannot be generated through Type ...

    • PYTHA Workshop - Required Settings for CAM EnRoute/EzyNest

      If you encounter sudden problems when exporting a job from PYTHA to your CAM software for nesting, you may need to check your Workshop CAM System Settings. These settings may change unexpectedly if a CAM licence on a network licence becomes ...

    • PYTHA Workshop - Remove Edge banding

      Workshop allows you to assign your edge banding in PYTHA. Edges with edge banding applied will be displayed as a thick red line.               If you wish to remove an edge: Click Workshop > Processing > Edge banding Select the edges that you want to ...