PYTHA Workshop - Required Settings for CAM EnRoute/EzyNest
If you encounter sudden problems when exporting a job from PYTHA to your CAM software for nesting, you may need to check your Workshop CAM System Settings. These settings may change unexpectedly if a CAM licence on a network licence becomes unavailable, or following a Windows update.
The following screenshots show the correct settings required to successfully export from PYTHA using CAM EnRoute/EzyNest. This CAM export is used by all customers exporting to EnRoute and EzyNest, as well as the majority of customers exporting to ALPHACAM.
To check your CAM EnRoute/EzyNest, click on EnRoute/EzyNest in Workshop > CNC Output, then select Setup Interface.
The following 3 settings are of greatest importance:
- Router around finished size
- Change L/R for cutouts
- Screw layer with depth
If you continue to have trouble exporting to CAM after checking these settings on your system, please contact our support team for further assistance.
Related Articles
PYTHA Workshop - Required Settings for CAM EnRoute/EzyNest
If you encounter sudden problems when exporting a job from PYTHA to your CAM software for nesting, you may need to check your Workshop CAM System Settings. These settings may change unexpectedly if a CAM licence on a network licence becomes ...PYTHA Workshop - Exporting Grained Pieces for Nesting in EnRoute/EzyNest
PYTHA Workshop allows for the easy export of grained items for correct orientation when nesting. To ensure that your grained items will be rotated correctly: Grain direction (Workshop > Processing > Directions > Grain Direction) to the grained edge ...PYTHA V26 - PYTHA to Alphacam Export Settings
Below are the required settings before exporting from PYTHA to Alphacam. Workshop > Settings > Machine Set Up Select EnRoute/Ezynest Next, go to Setup Interface Next, in Rules, Filters select these settings, Parts Filter Name Rule Rotate Rule Router ...PYTHA Workshop - Naming Convention For Router Export To DXF Layers (AlphaCAM and EnRoute)
PYTHA Workshop uses a standardised naming convention when exporting routing information to .dxfs for processing in CAM systems, such as AlphaCAM or EnRoute. This makes it easy to know what information PYTHA will produce, meaning checking settings and ...PYTHA Workshop - Selecting your CAM export
With the introduction of Workshop, some export functions in PYTHA have been relocated. All machining exports are now done through the Workshop menu, including Analyzer. To select your CAM export: Open the Workshop menu Click CNC Output > User layer ...