PYTHA Workshop - Type Automatic Name Filters

Type Automatic includes Part Name filters that ensure correct machining is applied depending on your pattern setup and part naming. It is highly recommended that both these filters be activated when running Type Automatic to ensure only the required machining is applied to your jobs. 

The 2 Type Automatic Part Name filters are as follows:

1. The first filter checks for differences in uppercase (or capital) and lowercase letters:
   

           

1. Activating this filter will restrict the application of patterns to part names that have matching upper and lowercase letters
   
2. Deactivating this filter will disregard letter case and apply any pattern that includes the same part name
3. The second filter checks the whole of the part name:
   

           

1. Activating this filter ensures that only parts with exactly the correct name will have a pattern applied
   
2. Deactivating this filter will apply any pattern that matches any part of your part name (this often leads to multiple patterns being applied to the same parts in error)
   

If you are having issues applying Type Automatic after following the above steps, please reach out to our support team. 

• Related Articles

• PYTHA - Type Automatic for Vertically Stacked Cabinets

  When running type automatic on two cabinets, vertically stacked that share one door, changes must be made to ensure the correct amount of hinges are applied to the door and cabinets. If not, hinges will only be applied to one of the cabinets. This is ...

• PYTHA Workshop - Manually Move Or Delete Type Automatic Bore Holes

  Occasionally it may be necessary to MANUALLY reposition or remove one or more of the bore holes generated by Type Automatic. You may need to MOVE a hinge so that it doesn't foul on an inner drawer or DELETE a single construction hole to ensure it ...

• PYTHA Workshop - Removing Ghost Points

  Occasionally moving parts that have Type Automatic bore holes can create additional points, such as those shown in the image below. These points lose their connection to the original bore holes and can't be deleted using the usual Workshop > Bore ...

• PYTHA - Drawer Front Orientation

  Labelling drawer fronts and their orientation is a time saving step in streamlining cabinet assembly and ensuring accuracy during installation. By using Type Automatic, this process can be automated—generating consistent, readable labels for each ...

• PYTHA Workshop - Creating Rebates With Router Edges

  In PYTHA Workshop, the Router Edges function allows for the creation and export of custom routing. This could be machining for a recessed handle, a groove for an LED light strip housing, or any other face routing that cannot be generated through Type ...