PYTHA Workshop - My Holes

PYTHA Workshop - My Holes

In PYTHA Workshop, the My Holes function allows for the creation and export of custom bore holes. 

To create Vertical bore holes:
  • Draw a Circular face - the diameter of the face determines the diameter of the bore hole     
           
  • Turn the face into a bore hole - Workshop > My holes
  • Assign a Depth, Layer and Pen colour to your bore hole
           
  • Click OK to create your bore hole

To create Horizontal bore holes:
  • Draw a Rectangular face - the width of the rectangle determines the diameter of the bore hole, the length determines the depth
  • Your rectangle must be drawn touching the edge where you want your horizontal bore to be
           
  • Turn the face into a bore hole - Workshop > My holes
  • Assign a Top distance, Layer and Pen colour to your bore hole
           
  • Click OK to create your bore hole
    • Related Articles

    • PYTHA Workshop - Internal cutouts and Router Edges

      In PYTHA Workshop, applying the Router Edges function is necessary for the creation and export of all internal cutouts. It is not sufficient to boolean the cutout into the part - Router Edges MUST be applied so the tooling and cutout data will be ...
    • PYTHA Workshop - Updated Workshop Manual now available

      An updated version of Willy's Workshop Manual is now available for PYTHA 24 Workshop users. You can download it from the link below. Please click here to download the PYTHA 24 Workshop Manual. Once downloaded you should copy it ...
    • PYTHA Workshop - Remove Edge banding

      Workshop allows you to assign your edge banding in PYTHA. Edges with edge banding applied will be displayed as a thick red line.               If you wish to remove an edge: Click Workshop > Processing > Edge banding Select the edges that you want to ...
    • PYTHA Workshop - Remove Router Edges

      Workshop allows you to assign router paths to edges in PYTHA. Edges with Router edges applied will be displayed as a thick yellow line.               If you wish to remove Router edges from an edge: Click Workshop > Processing > Router edges         ...
    • PYTHA Workshop - Exporting Grained Pieces for Nesting

      PYTHA Workshop allows for the easy export of grained items for correct orientation when nesting. To ensure that your grained items will be rotated correctly: Grain direction (Workshop > Processing > Directions > Grain Direction) to the grained edge   ...