Analyzer - Machine Blocks are not in the correct position

Analyzer - Machine Blocks are not in the correct position

In order to ensure correct positioning of Machine Blocks in Analyzer, apply Pen 20 to an edge representing the DEPTH of your machine blocks in PYTHA. This is particularly important for Machine Blocks that are being used to trigger drilling. 
    • Related Articles

    • Machine Blocks not exporting to Analyzer

      Some users may encounter issues when exporting jobs to Analyzer that include Machine Blocks. It may be necessary to draw your Machine Blocks in a certain orientation, then rotate them into the required orientation for correct drilling. Please be ...
    • Analyzer - Parts not processed correctly upon selecting "Run Geometry Script"

      There are a number of factors that can cause your Analyzer setup to produce unexpected or incorrect results. Before contacting the technical support team, please check the following: Check that you have assigned a Cabinet Type Check that spelling is ...
    • Analyzer - Resetting closed information panels

      If you have accidentally closed one of the information panels in Analyzer, please take the following steps to restore the windows to their default layout: Select the "User Settings" menu from the Analyzer menu bar Select "Rest Panels" from the ...
    • Analyzer - Installing your new 3D Analyzer software

      Upon receipt of your installation flash drive, please complete the following steps: Insert  the flash drive Open the "Analyzer-Install-Version-4" folder Run the "Setup" application Follow the prompts to complete your PYTHA installation, leaving all ...
    • Top Up Your 3D Analyzer Account

      Go to www.3danalyzersoftware.com and complete the following steps: Select BUY HOURS from the home page Select Recharge Hours Select the number of hours you would like to purchase Enter the quantity you would like to purchase then select Add to Bag ...