Analyzer - Parts not processed correctly upon selecting "Run Geometry Script"

Analyzer - Parts not processed correctly upon selecting "Run Geometry Script"

There are a number of factors that can cause your Analyzer setup to produce unexpected or incorrect results. Before contacting the technical support team, please check the following:

  • Check that you have assigned a Cabinet Type
  • Check that spelling is correct for attributes such as Part Names, Cabinet Type, Part Type, etc
  • Check that the parts you are exporting from PYTHA are positioned in the positive region of the X, Y and Z axes
  • Avoid using punctuation such as commas and full stops in Cabinet Names and Comments

    • Related Articles

    • Analyzer - Installing your new 3D Analyzer software

      Upon receipt of your installation flash drive, please complete the following steps: Insert  the flash drive Open the "Analyzer-Install-Version-4" folder Run the "Setup" application Follow the prompts to complete your PYTHA installation, leaving all ...
    • Analyzer crashes when "Run Translator Script" is selected

      On some systems, hitting "Run Trans. Script" to export from Analyzer can cause crashing. To resolve this issue, please set PYTHA to "Run as Administrator" then export to Analyzer again. This is because Analyzer is reliant on User Account Settings - ...
    • Analyzer - Straight edges appearing as curves

      Sometimes non-rectangular parts being processed from PYTHA into Analyzer will be generated with curves on edges that should be straight. To rectify this, add extra points to your edge using the PYTHA "Divide" tool: Select Edge Tools > Topology > ...
    • Part Rotation in EzyNest and EnRoute

      To ensure correct rotation of parts in EzyNest / EnRoute, please follow the procedure outlined below. 1.      In “Job Material Equivalence”, tick the box under “Rot.” for grained materials only (leave all solid colours unchecked) and leave the value ...
    • Machine Blocks not exporting to Analyzer

      Some users may encounter issues when exporting jobs to Analyzer that include Machine Blocks. It may be necessary to draw your Machine Blocks in a certain orientation, then rotate them into the required orientation for correct drilling. Please be ...